Sets the voltage of an output pin to a "high" state (the voltage of the power supply).
Another way to allow power through a pin is to use "Sinking". In this case the pin is set to a LOW state and the external device provides the positive current. So the flow is coming from outside the chip - inwards.
Generally with KicChips, higher current can be allowed when sinking than sourcing. See the User Guide "Active High, Active Low, Sinking and Sourcing" for more information.
' HIGH and LOW commands ' HighLow.txt ' Kic8 DO ' Make the pin go High HIGH 0 ' Pause for a short while (1 second) - to see changes.. Pause 1000 ' Make the pin go Low LOW 0 ' Pause for a short while (1 second) - to see changes.. Pause 1000 LOOP
A Virtual LED is created for HIGH Commands:
The Pin Layout Window updates after HIGH is executed: